Hundreds of systems running at leading zipper factories¡ªproven reliability.
Technical Support
Full lifecycle support
Case Metrics
20+Customers served
99%Inspection accuracy
30%Cost reduction
300%Efficiency gain
Finished Zipper Inspection Equipment
1. Overview
Smart QC for the final cutting & packaging stage of zipper production. Multiple configurations inspect nylon, metal, and resin zippers before or after cutting.
Flexible complete-machine options:
Smart cut-and-inspect machine¡ªintegrated cutting + AI inspection
Cut-pack-inspect all-in-one¡ªcut, QC, count, and packaging linked
Smart inspection labeling machine¡ªlabel only; mounts before existing cutters for fast vision upgrades
2. Detectable Defects
The system detects 30+ common defects across teeth, tape, sliders, and cut positioning (nylon / metal / resin; model-dependent):
Teeth
Missing, damaged, skewed, shrunk teeth
Misalignment, burrs, tooth defects
Poor engagement, height mismatch
Tape / appearance
Tape tear, stain, scratch
Color variance, wrinkle, weave anomaly
Poor sealing, edge burr
Marking / length
Missing/mixed/wrong marks
Length out of spec, cut offset
Sorting/count errors
Slider / parts
Missing, reversed, damaged slider
Missing/misplaced top/bottom stops
Poor pin/box fit
Miss rate below 0.01%; auto reject and count; up to ~40 pcs/min depending on spec and model.
3. Standard Models
All offerings below are complete machine solutions, in two groups: single-side and dual-side inspection.
30+ defect types including missing code, tape damage, shrunk teeth
¡À0.05 mm accuracy; >98% detection rate
Real-time feedback and reject sorting linkage
DC40 Dual-side Cut-and-Inspect
Complete machine
Zipper length 6¨C32 cm
Nylon / metal / resin configurations
D100 Dual-side Direct-Connect Machine
Complete machine ¡¤ inspection only, no cutting
Mounts before existing cutters to extend machine life; cutter OEM must update the interface program
Zipper length 12¨C100 cm
Nylon / metal / resin configurations
DC100 Dual-side Cut-and-Inspect
Complete machine
Zipper length 12¨C100 cm
Nylon / metal / resin configurations
DCP100 Dual-side Cut-Pack-Inspect
Complete machine
Optional bundling & packaging modules; less labor; traceable standards
Zipper length 12¨C100 cm
Nylon / metal / resin configurations
In-Process Zipper Inspection Modules / Equipment
1. Overview
In-process vision QC at key zipper manufacturing stages¡ªfrom metering (tooth)/sewing, tape gluing & punching, and slider insertion to top/bottom stop injection¡ªto catch defects mid-process.
2. Products & Solutions
For key in-process stations, JND offers inspection modules (retrofit to existing machines) and complete machines (inspection integrated with process actions) for mid-line rejection, marking, traceability, and closed-loop QC data.
Inspection modules
AI vision modules embed at key stations along the zipper line for in-process rejection and traceability. The flow below shows typical stations and matching inspection solutions (stations can be added or removed per your process).
¢ÙMetering (tooth) / sewing
Metering (tooth) / sewing inspection module
Tooth spacing, missing teeth, sewing defects
Synced with machine cycle; stable, traceable QC
¢ÚTape gluing & punching
Tape gluing & punching inspection module
Glue position, width, overflow; hole offset
Missing holes, burrs, tape damage
¢ÛSlider insertion
Slider insertion inspection module
Slider presence, orientation, damage
Synced with machine cycle; alarm/stop linkage
¢ÜTop/bottom stop injection
Top/bottom stop injection inspection module
Stop appearance, position, defects online
Misalignment, missing, flash; alarm and data logging
Complete machines
For marking, slider insertion, slider sorting, and other typical in-process stations, JND provides complete-machine solutions that integrate inspection with process actions¡ªready to deploy with matched cycle time.
Smart Marking Inspection Labeling All-in-One
Complete machine
Marking, AI vision inspection, and labeling integrated for in-process QC and identification
Detects missing/mixed/wrong marks and zipper appearance defects in one pass
Synced with line cycle; alarm linkage and traceability
Smart Inspection Slider Insertion Machine
Complete machine
Slider insertion and AI vision inspection in one machine
Online check for slider presence, orientation, and damage
Real-time alarm and stop linkage to reduce downstream defects
Smart Inspection Slider Sorting Machine
Complete machine
Slider vision inspection and automatic sorting integrated
Identifies appearance, size, orientation defects and sorts rejects
Improves slider feeding quality and cuts manual re-inspection
For other stations or special machines, we offer station-level vision solutions with custom mounting and MES/PLC integration for closed-loop QC data.
Combine in-process and finished-goods inspection to cut returns and rework.
Custom Solutions
Beyond standard models, we offer end-to-end customization by line layout, zipper type (nylon / metal / resin), station (in-process / finished, pre/post cut), and MES/ERP integration:
Station fit¡ªmodules for cutters, packers, slider machines, conveyors
Algorithm¡ªtrain on your SKU library; ~19 s setup, ~5 min changeover
Mechanical¡ªloading, flip, divert, reject paths per layout
Data¡ªreports, batch traceability, factory IT integration
Contact us with samples and line video for on-site assessment, design, and trial inspection.